Please follow the steps below:
1. Directly connect an Ethernet cable from the modem to the computer.
2. Open a web browser and enter the following address to access the gateway login page (Ip address: 192.168.0.1, Username: cusadmin, Password: password)
3. Once the Basic page has loaded, click the Gateway Function.
4. Toggle the Residential Gateway function box from Enabled to Disabled.
5. Click OK and the gateway will restart.
6. Once the modem is online, plug a device into port one to test their connectivity.
7. While in bridged mode, only port one will be active on the gateway.
8. If you want to put the modem back into gateway mode, factory reset the modem by pressing the reset button on the back for more than 10 seconds.
